I have no audio in my speakers when listening to an external source.
Please note that the AUX source supports a variety of input connections. By pressing the AUX button on the remote several times, the input toggles between the different audio inputs. Please press the remote control AUX button repeatedly, until the front display shows the correct input source. This should set the AUX input correctly, and you should have audio back in your speakers, to let you enjoy your Harman Kardon system.
I cannot adjust LIPSYNC, even though I have updated the software, and even though I can see Lipsync in the menu system.
This adjustment is possible ONLY when a film is running in the BDS unit. Press SETTINGS on the remote control, go to AUDIO, then down to Lipsync. Now you can adjust the sync, with a bar showing approximately how much correction has been selected. After pressing EXIT, the delay is shown in milliseconds.
I would like to add wireless loudspeakers to my BDS system. Can I use your WEM-1 wireless transmitter for this purpose?
Yes, this is possible. The speaker outputs of the BDS channels that you want to transmit wirelessly must be connected to the two speaker inputs of the WEM-1 transmitter. Furthermore, it is important to add one RCA Phono/Cinch cable between a free input jack on the BDS and one of the low-level inputs of the transmitter. This is done to establish a ground connection, avoiding hum.
I want to listen to stereo music through all five loudspeakers of my BDS system, but I cannot see if it is possible.
This function is not available on the BDS units. So-called five-channel stereo is a feature which is available in Harman Kardon AVR surround receivers, but it has not been included in the BDS platform.
I cannot get the Audio Return Channel to work with my BDS system.
It is important to use the correct HDMI connection on the BDS, marked with ARC. Also, the proper input must be selected with the AUX input selector button, which scrolls between the six AUX inputs. It always selects the AUX input that you used last, so once you have used the AUX ARC input, the BDS unit remembers it until you select another AUX input. Of course you have to have a TV which actually supports ARC.
Sometimes, if I remove the USB stick while playing from it, the BDS freezes.
Never remove a USB stick while the BDS is playing files from it. If the system freezes, switch the BDS unit OFF and then ON with the switch on the back panel to reset.
Is it sufficient to put my BDS into standby, before connecting a Source or a TV?
For your personal safety and to avoid possible damage to your equipment and speakers, it is always a good practice to turn off and unplug the AVR and ALL source equipment from the AC output before making any audio or video system connections.
Is tobacco smoke harmful for my sound system?
Yes, very much so! Massive exposure to tobacco smoke leaves a yellow, sticky layer of tar on all surfaces. The most vulnerable components in an audio-visual system are Blu-ray, DVD or CD players. They read discs with laser beams, and the laser pick-up cannot work if a layer of tar builds up on the lens. Similarly, contacts and mechanical potentiometers on amplifiers and other components may become noisy or defective. Please note that the warranty does not cover tobacco-smoke related problems. You must pay for any repair or cleaning of tobacco-smoke caused defects.
Sometimes when I watch HD or 3D material, I can see white specks or "snow" on the screen. What can I do to avoid this?
Try another HDMI cable, and make sure that it is a high-speed version. This solution usually solves the problem, which is caused by insufficient cable bandwith.
My BDS 2 / BDS 5 seems to permit a maximum of 100 tunes in a music playlist. Is this correct?
Yes, playlists in these BDS units have an upper limit of 100 files.