BDS 770 - Product support

Please switch the iPod Nano ON if you want it to charge while docked.

Please try to establish the desired test tone volume before starting the EzSet/Eq procedure. If the volume is too loud or too soft, change the volume while the test is running, then re-start the test after it has stopped.

This may happen if you press "MUTE", then initiate the EzSet/EQ procedure. Please press "MUTE" on the remote control to delete the symbol. Do not mute the unit before performing the EzSet/EQ procedure.

This is normal. The signal is muted when switching sound formats.

Selecting USB while already playing files will stop playback until you select a new file. Do not select USB if you wish to continue playing the current file.

Never remove a USB stick while the BDS is playing files from it. If the system freezes, switch the BDS unit OFF and then ON with the switch on the back panel to reset.

The Channel Buttons cannot be used in the iPod song lists.

Please stop any current playback before trying to restore the default settings.

Please note that the AUX source supports a variety of input connections. By pressing the AUX button on the remote several times, the input toggles between the different audio inputs. Please press the remote control AUX button repeatedly, until the front display shows the correct input source. This should set the AUX input correctly, and you should have audio back in your speakers, to let you enjoy your Harman Kardon system.

Harman Kardon BDS systems can contain an HKTS 200 subwoofer rather than the HKTS 210 subwoofer that is mentioned in the documentation and manual. Both subwoofers have the same performance. The difference in product type number is due to the fact that these subwoofers are built in two different factories. When used in a Harman Kardon BDS system, there is no performance difference.

Yes, this is possible. The speaker outputs of the BDS channels that you want to transmit wirelessly must be connected to the two speaker inputs of the WEM-1 transmitter. Furthermore, it is important to add one RCA Phono/Cinch cable between a free input jack on the BDS and one of the low-level inputs of the transmitter. This is done to establish a ground connection, avoiding hum.

It is important to use the correct HDMI connection on the BDS, marked with ARC. Also, the proper input must be selected with the AUX input selector button, which scrolls between the six AUX inputs. It always selects the AUX input that you used last, so once you have used the AUX ARC input, the BDS unit remembers it until you select another AUX input. Of course you have to have a TV which actually supports ARC.

This function is not available on the BDS units. So-called five-channel stereo is a feature which is available in Harman Kardon AVR surround receivers, but it has not been included in the BDS platform.

For your personal safety and to avoid possible damage to your equipment and speakers, it is always a good practice to turn off and unplug the AVR and ALL source equipment from the AC output before making any audio or video system connections.

Yes, very much so! Massive exposure to tobacco smoke leaves a yellow, sticky layer of tar on all surfaces. The most vulnerable components in an audio-visual system are Blu-ray, DVD or CD players. They read discs with laser beams, and the laser pick-up cannot work if a layer of tar builds up on the lens. Similarly, contacts and mechanical potentiometers on amplifiers and other components may become noisy or defective. Please note that the warranty does not cover tobacco-smoke related problems. You must pay for any repair or cleaning of tobacco-smoke caused defects.

Try another HDMI cable, and make sure that it is a high-speed version. This solution usually solves the problem, which is caused by insufficient cable bandwith.